| Article number: | ME01081 |
For ideal cleaning results the Chamber Protect cleaning set, including a powerful cleaner and 50 lint-free cloths and 1 microfibre cloth, is perfectly matched to all MELAG autoclaves.
Benefit from Chamber Protect when cleaning the chamber and trays once a week:
Step 1
Apply Chamber Protect
Open the door of your autoclave, turn the device off and let it cool down. Next, apply approximately 2 sprays of Chamber Protect to the inside of the door and approximately 15 sprays into the chamber.
Step 2
Spread Chamber Protect
Spread the cleaning spray over the entire stainless steel surfaces with one of the lint-free cloths. Allow the Chamber Protect spray to soak in for about 3 minutes.
Step 3
Clean the stainless steel surfaces
Take another lint-free cloth and moisten the cloth as well as the chamber with sufficient demineralised water (about 50 ml each). Wipe the surfaces sprayed with Chamber Protect with the cloth and allow it to soak in for about 5 minutes.
Step 4
Dry the stainless steel surfaces
Finally, dry the inside of the door and the entire chamber thoroughly with the blue microfibre cloth. The autoclave is now available again for sterilizing the instruments.
