The low design of the Ergotop makes mounting the treadmill easy for the patient. An optional mounting platform is available for patients with reduced mobility. A safety and emergency stop feature is standard; it uses a magnetic safety belt to stop the treadmill immediately if the patient should fall off. Optional is a large “emergency stop” button that allows medical personnel to immediately stop the treadmill at any time. For less stable patients, the handle can be extended to the end of the walking section, providing extra safety for your patients.
Good design and uncompromising safety
The low design of the Ergotop makes mounting the treadmill easy for the patient. An optional mounting platform is available for patients with reduced mobility. A safety and emergency stop feature is standard; it uses a magnetic safety belt to stop the treadmill immediately if the patient should fall off. Optional is a large “emergency stop” button that allows medical personnel to immediately stop the treadmill at any time. For less stable patients, the handle can be extended to the end of the walking section, providing extra safety for your patients.
Operation also without control panel
Since the speed and incline of the Ergotop are controlled from a PC using the PADSY-Ergo stress test software, a control panel on the treadmill is not necessary. Thus, it is impossible for patients to make changes to the exercise routines. Ergotop accelerates the treadmill evenly and steadily from 0 km/h, so that the patient can start moving on the treadmill smoothly and without jerking. The speed is adjustable in 0.1 km/h increments and the incline can be set in 1% increments up to a maximum of 25%, meeting the requirements for high-precision stress testing.
A good feeling while training
The shock-absorbing design of the Ergotop, combined with the full-length shock absorber below the walking section, gives the patient a good feeling during exercise. The treadmill is automatically centered and does not require any lubricants. Ergotop is built robustly and designed to run extremely quietly – virtually no noise is produced.
No maintenance required
Ergotop is virtually maintenance free. All moving parts are designed for permanent operation, without the need for extensive maintenance. The drive motor is completely maintenance-free and is electronically controlled, so that the speed of the treadmill is always the same as the set speed. If the Ergotop is mounted while it is running, the speed of the treadmill will not change.
Technical specifications
Speed range: 0.5 – 20 km/h
Increase: 0 – 25%
Running surface: 50 x 150 cm
Maximum patient weight: 225 kg
Motor power: 1.8 kW
Interface to PC: RS 232 and USB
Weight: 145 kg
Dimensions (L x W x H): 212 x 76 x 110 cm
Meets all standard and safety standards
Options
emergency stop button
Release speed: 0.1 – 12 km/h
Extension to the standard steering rod
armrest
access plate
Body Weight Support System
Backward Raise: -10% (Electric)
Control unit, programmable
